Loading…
What’s new
- Added an ability to automatically adjust duct size depending on connector for fittings from ECCAD pickoffs
- Improved import from ECCAD
What’s new
- Enhanced turning vanes
- Enhanced import of Square-to-Round fittings from PractiCAD
What’s new
- Added enhanced formatting to labels and reports
- Added an ability to cut alignment holes for turning vanes with exact distance
- Implemented Bar-Code 128
- Enhanced tie rod intersection with connectors with add parameter
- Enhanced tie rod application for segmented duct
- Improved material stock handling on import from PractiCAD
- Enhanced catalog items
What’s new
- Improved import of gored elbows from PractiCAD
- Added an option to process fittings without allowances
- Improved import form CADPipe
- Enhanced single blade dampers
What’s new
- Added new type of wall panel assembly with multiple doors and windows
- Enhanced Square-to-Round fittings (PractiCAM Single Wall Library)
- Enhanced Round Reducers (PractiCAM Single Wall Library)
- Enhanced Boot Tap Flat Saddle Tee (Single Wall Library)
- Enhanced Register Box (PractiCAM Single Wall Library)
- Enhanced End Cap (PractiCAM Single Wall Library)
What’s new
- Enhanced Picture Frame (Auxiliary Items)
- Enhanced End Cap (PractiCAM Double Wall)
- Enhanced several round taps
What’s new
- Improved round and oval connectors to account for add parameter
- Enhanced import from ECCAD
- Enhanced coil machine drivers
- Enhanced joints on round fittings
- Enhanced several transitions from PractiCAM library
- Enhanced Round Offset fitting (PractiCAM Single Wall Library)
- Enhanced Square-to-Round fittings (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Round Tee with Boot Taps (PractiCAM Double Wall Library)
- Round Conical Cross with Boot Taps (PractiCAM Double Wall Library)
- Added an ability to utilize multiple screens for input
- Enhanced Round Damper Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Roof Jack On a Pitch fitting (Round Flange Pattern) (PractiCAM Single Wall Library)
What’s new
- Added an ability to continuously edit fittings in takeoff
- Added an ability to import the barcode numbers from PractiCAD takeoffs
- Enhanced Round Dampers
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Added an ability to import angled taps from PractiCAD
What’s new
- Test Release
- Added an ability to import angled taps from PractiCAD
What’s new
- Enhanced cutter setup procedure
What’s new
- Enhanced import of PractiCAD takeoffs
What’s new
- Added CAD Double Wall library
- Enhanced export to coil machines
- Enhanced import of specifications from PractiCAD
What’s new
- Added Saddle LoLoss Tap (PractiCAM Single Wall Library)
- Added single blank layout for F107 - C/L Rectangle To Flat Oval fitting
- Added single blank layout for F108 - Offset Rectangle To Flat Oval fitting
- Added single blank layout for F108 - Offset Rectangle To Round fitting
- Added single blank layout for F108 - C/L Rectangle To Round fitting
- Added single blank layout for F108 - Offset Rectangle To Flat Oval fitting
- Enhanced dampers
What’s new
- Added an ability to display fittings only from active fitting bins in specifications
- Added parameter Damper to a fitting list for sorting
- Enhanced Square-to-Oval Elbow fitting (PractiCAM Single Wall Library)
- Enhanced Box With Flanges fitting (PractiCAM Single Wall Library)
- Enhanced metric export to Coil Line machines
What’s new
- Enhanced several fittings from GalVent Library
- Enhanced export to Excel for Russian customers
What’s new
- Added an ability to preview fitting in fitting locator
- Enhanced Round Damper fitting (BaltVent Library)
What’s new
- Enhanced import of double wall duct from CAD
What’s new
- Enhanced Wraparound Duct fitting (PractiCAM Single Wall Library)
- Enhanced download procedure to Aircotron 1000 control
- Enhanced export to Excel
What’s new
- Added an ability to import double wall duct from CAD
What’s new
- Added an ability to Copy/Paste conditions in advanced specifications
- Enhanced import from CAD
What’s new
- Bin (Auxiliary Items)
- Added an option to not to re-use deleted lot numbers
- Added Catalog Items report
- Enhanced LoLoss Tap fitting (PractiCAM Single Wall Library)
- Enhanced Round Reducer with Round Tap fitting (PractiCAM Single Wall Library)
- Re-adjusted size of the 2D & 3D pictures of the fitting on the labels and reports to fit all required parameters
What’s new
- Added an ability to import pickoff files from CAD by file extension
- Enhanced export of CNC files
What’s new
- Added alignment notches to all round fittings
- Enhanced stiffeners
What’s new
- Enhanced advanced specifications
- Enhanced Labor Cost report
- Enhanced dampers
What’s new
- Added an ability to calculate a real size of damper blade in reports
- Added new connector accessory screw
- Added several new fittings to GalVent Fitting Library
- Enhanced export to DBF file for double wall fittings and for mufflers
- Enhanced dampers
What’s new
- Oval Cross with Round Taps (PractiCAM Single Wall Library)
- Oval Tee with Rectangular Tap (PractiCAM Single Wall Library)
- Added damper to a Double Wall Boot Tap fitting (PractiCAM Single Wall Library)
- Added an ability to select sizing table in specifications
What’s new
- SD VAV Box (Rect) (Auxiliary Items Library)
What’s new
- Added an ability to sort variables and conditions in advanced specifications
What’s new
- Added an ability to define an icon for custom fittings
- Added separate lock for the Straight Out to several Square-to-Round fittings
What’s new
- Enhanced round dampers
- Enhanced export to Excel
What’s new
- Enhanced several fittings from GalVent Library
- Adjusted precision of some accessory parameters
What’s new
- Added an ability to sort export to coil line by any parameter
What’s new
- Added two reports to calculate connector accessories on In & Out of the fitting separately
What’s new
- Added an ability to create combined report
- Enhanced Boot Tap fittings (PractiCAM Single & Double Wall Libraries)
What’s new
- Added an ability to recognized Job, Drawing & Takeoff Name in advanced specifications
What’s new
- Square Throat Radius Heel Elbow (PractiCAM Double Wall Library)
- Round Tee with 2 Round Reducing Taps (PractiCAM Single Wall Library)
- Enhanced several fittings from SEMCO Double Wall Library
What’s new
- Added quantity of blanks for all Straight Duct
- Added an ability to create multi blade dampers
- Enhanced advanced specification
- Enhanced marking of cut sheets feature
What’s new
- Added Advanced Specifications feature
- Added an ability to sort fittings in the specifications
What’s new
- Square-to-Round (Expanding) (PractiCAM Single Wall Library)
- Square-to-Round (Expanding) (PractiCAM Double Wall Library)
- Added external stiffeners to elbows
- Added CFU and BTU parameters to the cost estimating for catalog items
- Enhanced PractiCAM sheet labels
What’s new
- Several interface improvements
What’s new
- Finished Length Transition (PractiCAM Double Wall Library)
- Rectangular Wye (PractiCAM Double Wall Library)
What’s new
- Added an ability to prepare report for connectors & accessories added to an outer wall of the fitting
What’s new
- Added an ability automatically mark sheets which were transferred to a cutter
- Added an ability to unmark sheets which were transferred to a cutter
- Added an ability to measure arc radius
- Added an ability to import sizing information from PractiCAD
What’s new
- Added new connector accessory type - Covers
- Added an ability to automatically mark parts with piece and (or) part number
- Enhanced tracking feature
- Enhanced PractiCAM nest
- Enhanced manual nest
What’s new
- Enhanced Oval Elbow Hard Gored 5 (PractiCAM Single Wall Library)
- Enhanced Oval Elbow Soft Gored 5 (PractiCAM Single Wall Library)
What’s new
- Added the Inventory feature
- Added an ability to add flat parts to a completed nest to full fill the Inventory
- Added comma as a decimal separator on reports and labels
- Added new appearance for the connectors - Standing S&D and Standing D&S
What’s new
- Added several new functions to improve cutting capabilities
- Enhanced cutting modes
What’s new
- Enhanced final report - Added an ability to calculate weight of turning vanes
- Enhanced pipe cutter driver
What’s new
- Added Round Tee with Standard Rectangular Transition Tap (PractiCAM Double Wall Library)
- Added marking notches to all oval fittings
- Enhanced LoLoss T-Tap/Saddle (CAD Library)
- Enhanced PractiCAD takeoff import
- Enhanced PractiCAM reports
What’s new
- Added an ability to turn automatic nest on and off
What’s new
- Added Conical Tee with Reducer (PractiCAM Single Wall Library)
- Added Conical Tee with Reducer (PractiCAM Double Wall Library)
- Enhanced Concentric Reducer with Recalc fitting (PractiCAM Single Wall Library)
- Enhanced joints on round reducing fitting
What’s new
- Added an ability to set quantity of gores from specifications
- Added use earlets parameter for rectangular and oval dampers
- Added a new type of earlets U-Bolt for all dampers
What’s new
- Conical T-Tap (Flanged) (PractiCAM Double Wall Library)
- Added and ability to nest metal and liner material simultaneously
- Added an ability to load a certain blank from saved CNC file
- Enhanced Radius Tee (PractiCAM Single Wall Library)
- Enhanced Round Y-Branch (PractiCAM Single Wall Library)
- Enhanced Square To Oval Elbow (PractiCAM Single Wall Library)
- Enhanced Round Elbow 2 Gored (PractiCAM Double Wall Library)
- Enhanced explode of straight duct liner
- Enhanced DWG/DXF import of ellipses & polylines
What’s new
- Added Round Reducer with Round Taps Upper Length (PractiCAM Single Wall Library)
- Added ST6 Flat (ASI Library)
- Added dampers to Round Reducer with Round Taps 1x1 fitting (PractiCAM Single Wall Library)
- Added Seam Angle parameter Round Elbow Gored 5 (PractiCAM Double Wall Library)
- Added ability to calculate spiral material in Job Material List
- Added Angle parameter in fitting list
- Enhanced #HDD6 fitting (ASI Library)
- Enhanced properties of the nest diagram picture in reports & labels
- Enhanced export of CNC files
- Enhanced export to Excel
What’s new
- Added Round Straight Duct with Vent (Auxiliary Items)
- Added an ability to apply accessories to an outer wall for double wall fittings
What’s new
- Added an ability to connect equipment used RS-232 & TCP/IP protocols automatically on load
- Added an ability to save CNC programs automatically when nest is finished
- Added an ability to save CNC programs to dedicated directories on a hard drive separately for metal and for liner
- Added auto-multi-export to equipment
- Added an ability to cut fastener Holes for volume dampers
- Changed order of parameters for double wall fittings and adjusted dependency of inner wall parameters from outer wall parameters
- Enhanced segmentation
- Enhanced sizing tables
- Enhanced spiral pipe labels
What’s new
- Added parameter Mark Notches Per Circle for Square To Round/Oval fittings to the specification
- Enhanced DXF import
What’s new
- Enhanced import of PractiCAD takeoffs
- Enhanced PractiCAM accessories
What’s new
- Enhanced nest of round elbows - added an ability to split the "fish"
- Enhanced miscellaneous parameters of turning vanes for better reporting
- Enhanced turning vanes reports
What’s new
- Enhanced PractiCAM nest
What’s new
- Added an ability to define rights for each PractiCAM user
- Added a Ellipse tool in the Part Editor
- Added a Parabola tool in the Part Editor
- Added a Hyperbola tool in the Part Editor
- Added parallel dampers
- Enhanced Square-to-Round fittings
- Enhanced Z-Bar stiffeners
- Enhanced dampers
What’s new
- Enhanced fittings with Radial Lock parameter
- Enhanced vanes handling for Z-Transition Left & Right
- Enhanced reinforcement reports
- Enhanced Spiral Pipe fittings
- Enhanced DWG/DXF import
- Enhanced connector accessories
What’s new
- Enhanced wight reports
What’s new
- Added duct sizing for rectangular fittings
- Added Location parameter for Labels and Reports
- Enhanced several fittings from BaltVent fitting library
What’s new
- Added Round Reducer (PractiCAM Double Wall)
- Added Round Offset (PractiCAM Double Wall)
- Added Round Elbow Gored 3 (PractiCAM Double Wall)
- Added Round Elbow Gored 4 (PractiCAM Double Wall)
- Added Round Bullhead Tee (PractiCAM Double Wall)
- Added Round Reducing Bullhead Tee (PractiCAM Double Wall)
- Improved duct sizing for round and oval fittings
What’s new
- Added Dampers to a Spiral Pipe fittings
- Added Dampers to Round Reducer with Round Taps 1x1 (PractiCAM Single Wall)
- Enhanced update procedure of custom fitting templates
- Enhanced sorting order for coil line and cutting machines
What’s new
- Added Roof Flashing (Roofing Library)
- Enhanced SL8 fitting (Auxiliary Items Library)
- Enhanced FL8 fitting (Auxiliary Items Library)
- Enhanced data import import from previous versions
What’s new
- Added new stiffener reports
- Enhanced PractiCAM stiffeners
- Enhanced Square-to-Round fittings
What’s new
- Added Triangular End Cap (PractiCAM Single Wall Library)
- Added Round Reducer with Round Tap Type 2 (PractiCAM Single Wall Library)
- Added offest to the list of default parameters for dampers
- Added a parameter for account for acoustic liner to the radial vanes
- Enhanced catalog items
What’s new
- Added Round Conical Tee with Conical Tap (PractiCAM Single Wall Library)
- Added Round Conical Tee with Round Tap (PractiCAM Single Wall Library)
- Added Round Conical Cross with LoLoss Taps (PractiCAM Single Wall Library)
- Added an ability to have two different types of liner for radial fittings
- Enhanced Round Reducer with Round Taps NxN (PractiCAM Single Wall Library)
- Enhanced F139 - F/O Elbow N W/Reducer (SDS Library)
- Enhanced Simple Rectangular Canvas
- Enhanced Round Elbow Gored 5 (PractiCAM Double Wall Library)
- Enhanced manual nest
What’s new
- Enhanced all Spiral Pipe fittings
- Enhanced PractiCAM specifications
- Enhanced PractiCAM labels
What’s new
- Added Rectangular Plug (Auxiliary Library)
- Enhanced Round Conical Tee with Round Tap fitting (PractiCAM Single Wall Library)
- Enhanced PractiCAM labels
What’s new
- Enhanced Simple Canvas Connection fitting (Simplified Duct Library)
- Enhanced PractiCAM reports & labels
What’s new
- Enhanced automatic segmentation
What’s new
- Enhanced leads and loops placement for the flipped blanks
What’s new
- Added an ability to import multiple dxf files
- Enhanced Gas Vent Flash fitting (Roofing Library)
- Enhanced Radius Elbow With Two Locks fitting (PractiCAM Single Wall Library)
- Enhanced Quick Processing
What’s new
- Enhanced serial port connectivity
What’s new
- Enhanced serial port connectivity
What’s new
- Added an ability to connect equipment on start-up and automatically save cnc file once nest is finished
What’s new
- Added links to a fitting tree branches in description of specifications
- Added an ability to lock fabrication type to Label Only for Rouns Pipe, Spiral Pipe, and End Caps
- Enhanced PractiCAM security
What’s new
- Test Release
- Enhanced PractiCAM security
What’s new
- Added an allowance to radial vanes
- Added an ability to select material, gauge, stock and quantity in import window
- Added bend notch as an option for segmented blanks
- Added airflow direction to a nested sheet preview for segmented fittings
- Enhanced serial port connectivity
What’s new
- Added a Quick Export button to print Labels, Reports and export a takeoff in any format with a single click
- Added an ability to change Angle parameter for bend lines in Part Editor
- Added Report with cost breakdown for field labor and shop labor
- Added and ability to print reports in order
- Enhanced splitter dampers
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced manual nest
- Enhanced Grill fitting (Roofing Library)
- Enhanced labels printing procedure for some printer models
What’s new
- Added new color coding feature to the PractiCAM labels
- Added volume dampers to Square-to-Round fitting (PractiCAM Single Wall Library)
- Added volume dampers to Ogee Transition Left fitting (PractiCAM Single Wall Library)
- Added volume dampers to Ogee Transition Right fitting (PractiCAM Single Wall Library)
- Enhanced China Cap (GalVent Library)
- Enhanced Rectangular Muffler 2 (GalVent Library)
What’s new
- Test Release
- Added new color coding feature to the PractiCAM labels
What’s new
- Added an ability to copy & paste fitting & parts palettes
- Added marks for break points in Part Editor
- Enhanced Spiral Pipe (Round) (GalVent Library)
- Enhanced Rectangular Tee 2 (GalVent Library)
What’s new
- Added an ability to mirror around any line in Part Editor
- Enhanced backup procedure
What’s new
- Rectangular Muffler 1 (GalVent Library)
- Round Muffler (GalVent Library)
- Enhanced Offset 1 (GalVent Library)
- Enhanced Offset 3 (GalVent Library)
- Enhanced Square Elbow 2 (GalVent Library)
- Enhanced Radius Elbow 1 (GalVent Library)
- Enhanced Radius Elbow 2 (GalVent Library)
- Enhanced Radius Elbow 3 (GalVent Library)
- Enhanced Rectangular Tee 2 (GalVent Library)
- Enhanced Rectangular Tee 3 (GalVent Library)
- Enhanced Cross 2 (GalVent Library)
- Enhanced Round Elbow 1 Gored N (2-7) (GalVent Library)
- Enhanced Round Cross 1 (GalVent Library)
- Enhanced Spiral Pipe (Round) (GalVent Library)
- Enhanced backup procedure
- Enhanced export takeoffs as DBF files
What’s new
- Added an ability to change the rotation direction when cutting a pipe
- Added an ability to set different hole diameters for damper rods for each side of the fitting
- Added parameter Tap Joint to the several fittings from BaltVent fitting library
- Added parameter Cut Notch Back to the Round Tap On Plate fitting (PractiCAM Single Wall Library)
- Added parameter Cut Notch Back to the Tapered Body Shoe Tap Cross W/O Slip-Collar fitting (Quote Express Library)
- Added parameter Cut Notch Back to the Saddle Shoe Tap fitting (Quote Express Library)
- Enhanced import of Square Tee fitting from PractiCAD
- Enhanced Rotation Tool to accept decimals in part editor
- Enhanced Measure Tool in part editor
- Enhanced Bend a Line Tool in connector editor
- Enhanced several fittings from BaltVent fitting library
What’s new
- Enhanced PractiCAM allowances
What’s new
- Enhanced import from PractiCAD
What’s new
- Wheather Cap (ASI Library)
- Added damper rods to the Tapered Body Lat. Con. Tap Cross W/Slip-Collar fitting (Quote Express Library)
- Enhanced Round Duct Notch (Auxiliary Items Library)
- Enhanced a backup procedure
- Enhanced labels printing procedure for some printer models
What’s new
- Enhanced Oval Conical Tee with Oval Conical Tap fitting (PractiCAM Single Wall Library)
- Enhanced No Waste Rectangular Straight Duct fitting (PractiCAM Single Wall Library)
- Enhanced Pan fitting (PractiCAM Single Wall Library)
- Enhanced Radial Tee upto 180 degrees fitting (PractiCAM Single Wall Library)
- Enhanced Linear Box 2 fitting (PractiCAM Single Wall Library)
- Enhanced Split A Line tool in part editor
- Enhanced Zoom tool in part editor
- Enhanced Bend Notches
What’s new
- Rectangular Straight Duct with Special Connectors (PractiCAM Single Wall Library) with ability to put Drive on the shortest side
- Added an ability to set Distance From Edge Of Sheet for liner more than 1"
- Enhanced No Waste Rectangular Straight Duct fitting (PractiCAM Single Wall Library)
- Enhanced Adjustable Angle Tap fitting (PractiCAM Single Wall Library)
- Enhanced SPOT Tie Rods Report
- Enhanced duct sizing tables
What’s new
- End Cap with N Holes and 2 rows (Auxiliary Item Library)
- Rectangular Muffler (GalVent Library)
- China Cap (GalVent Library)
- Round Gate (GalVent Library)
- Round Muffler (GalVent Library)
- Tie Rods Report
- Enhanced PractiCAM profiles
- Enhanced Round Tap on Plate (PractiCAM Single Wall Library)
- Enhanced Rectangular Canvas Connection (PractiCAM Single Wall Library)
What’s new
- Aspen (Roofing Library)
- Scupper & Conductor Head (Roofing Library)
- Added an ability to cut scrap off for the liner
- Enhanced printing of PrcatiCAM labels
What’s new
- F81 N Gored (SDS Library)
- F81 N Gored (SPOT Single Wall Library)
- Enhanced PractiCAM Reports
- Enhanced PractiCAM Labels
- Enhanced PractiCAM Lead Ins & Lead Outs
What’s new
- New manual nest
- Added an ability to move the blank up to another blank on the nested sheet
- Added an ability to cut liner inside out separately from metal
- Enhanced PractiCAM profiles
- Several interface improvements
What’s new
- Enhanced import of DXF files
What’s new
- Added an ability to export sheets to IOWA Precision Type 2
What’s new
- Test Release
- New manual nest
What’s new
- All fittings from PractiCAM Double Wall Library changed according to fittings from PractiCAD Double Wall Library
- Added several new fittings to BaltVent Library
What’s new
- Rectangular Wye 1 (GalVent Library)
- Rectangular Wye 2 (GalVent Library)
- Round Wye 1 (GalVent Library)
- Round Wye 2 (GalVent Library)
- Round Wye 3 (GalVent Library)
- Added an ability to edit liner in Part Editor
- Added an option to show lines and arcs connection points in Part Editor
- Enhanced Catologue Items
- Enhanced import from PractiCAD
- Enhanced export takeoffs as DBF files - added flat parts
What’s new
- Test Release
- Added an ability to edit liner in Part Editor
What’s new
- Added 40 marking notches per circle for all Square-to-Round fittings
- Enhanced Ogee Transition Left (PractiCAM Single Wall Library)
- Enhanced Ogee Transition Right (PractiCAM Single Wall Library)
- Enhanced Radius Elbow Right (PractiCAM Single Wall Library)
- Enhanced Double wall fittings from BaltVent Library
- Enhanced nest on pipe
What’s new
- Enhanced Pipe Cutter driver
- Enhanced export takeoffs as DBF files
- Enhanced export to Fixed-Space format file
What’s new
- Added labels for Pipe fittings
- Enhanced an ability to print selected labels
- Enhanced export takeoffs as DBF files
What’s new
- Added Stiffeners to the several fittings from PractiCAM library
- Enhanced export takeoffs as DBF files
What’s new
- Enhanced nest on pipe
- Enhanced export takeoffs as DBF files
What’s new
- Impoved Create parts from text tool
- Added an Eraser tool to the Create vector part from bitmap section
- Added an ability to save entire library as PMX
- Added Save As Default option for Catalog Items
- Enhanced Allowance editor
- Enhanced Technology tracking
What’s new
- Added a complete control over the Liner and Insulation layers in Part Editor
- Added an option to see connection points in Part Editor
What’s new
- Test Release
- Added a complete control over the Liner and Insulation layers in Part Editor
- Added an option to see connection points in Part Editor
What’s new
- Added an ability to save nested liner sheets as a dxf file
- Added an ability to set distance between liner blanks up to 2"
- Added an ability to create Job/Drawing/Takeoff tree on save CNC file
- Added HR/LB and LB/HR as a choices in Estimating
- Enhanced Oval Transition Twisted (PractiCAM Single Wall)
- Enhanced Connector Frame Report
- Enhanced Connector Report
What’s new
- Enhanced Round Reducer with Round Tap (PractiCAM Single Wall Library)
- Enhanced Square Elbow with Radial Throat (PractiCAM Single Wall Library)
- Enhanced Square Elbow with Radial Throat and Reducing Out (PractiCAM Single Wall Library)
- Enhanced Rectangular/Round/Oval Chase Top N Icon variant (PractiCAM Single Wall Library)
What’s new
- BaltVent Single Wall Library
- BaltVent Double Wall Library
- Added Sample Pipe Cutter driver
- Added Bravo Cutter driver
- Enhanced PractiCAM segmentation
What’s new
- Added complete control over the part in Part Editor
- Screw (Auxiliary Items Library)
- SL8 (Auxiliary Items Library)
- FL8 (Auxiliary Items Library)
- Stiffeners and Tie Rods added in account to Cost Estimating
- Enhanced Three Way Tee (PractiCAM Single Wall Library)
- Enhanced export takeoffs as DBF files
- Enhanced export to Fixed-Space format file
What’s new
- Test Release
- Added complete control over the part in Part Editor
What’s new
- Round Y Branch with Gores (PractiCAM Single Wall Library)
- Spiral Pipe Round (GalVent Libarary)
- Enhanced export takeoffs as DBF files
What’s new
- Added marking notches for the rod placement for round & oval dampers
- Added ability to calculate cost for the Wrap material
- Added an ability to set material, gauge and material stock for vanes on the fly
- Enhanced all PractiCAM dampers
- Enhanced parameter list for catalog item
- Enhanced export takeoffs as DBF files
What’s new
- Enhanced an Archive tool
What’s new
- Added an ability to utilize CNC pipe cutters with PractiCAM
- Enhanced export takeoffs as DBF files
- Enhanced export to Fixed-Space format file
What’s new
- Added a seam parameter for all fitting
- Enhanced quick input
- Enhanced materials import
- Enhanced import of stiffeners from PractiCAD takeoff
- Enhanced export to Fixed-Space format file
What’s new
- Added parameter center line length for fittings Radius Elbow Left and Radius Elbow Right from PractiCAM Single Wall Library
- Added an ability to import new Stiffeners from PractiCAD
What’s new
- Round Elbow (GalVent Library)
- Round Reducer (GalVent Library)
- Radius Elbow (GalVent Library)
- Added an ability to create subfolders during archiving
- Added an ability to create empty Stiffener & Tie Rod
- Enhanced Job Materials List - Used Area Report
- Enhanced Weight Report With Time
What’s new
- Added parameter Hat Finished Length for Damper Sleeves (PractiCAM Single Wall Library)
- Enhanced specifications for the canvas connectors
- Enhanced PractiCAM user profiles
- Enhanced PractiCAM database structure
What’s new
- Enhanced nest when an empty sheet was added
- Enhanced PractiCAM database
What’s new
- Added Accessory Cut Report
- Enhanced Round Elbows Gored fittings (PractiCAM Double Wall Library)
- Enhanced Quick Input
What’s new
- Added parameters Joint In and Joint Out for the R-8 Reducer fitting (Omni Duct Single Wall Library)
- Enhanced Round Elbow Gored 2 Outline (PractiCAM Double Wall Library)
- Enhanced Ring Cover (ASI Library)
What’s new
- Added an ability to create an empty stiffener
- Enhanced Tie Rods Placement
What’s new
- Added an ability to import holes for round and oval pipe from PractiCAD
- Enhanced Tie Rods Placement
What’s new
- Added an ability to specify color of different elements on labels depending from Marking Groups
- Enhanced PractiCAM database structure
- Enhanced reports for imported from PractiCAD takeoffs
- Enhanced plan view on labels and reports for Round Offset fitting (PractiCAM Single Wall)
What’s new
- Test Release
- Enhanced PractiCAM database structure
What’s new
- Added connector accessories summary report
- Added an ability to import cutouts for Taps and Spin Collars from PractiCAD
What’s new
- Added damper for Boot Tap fitting (PractiCAM Single Wall)
- Enhanced import from PractiCAD
What’s new
- Added tool Apply Specifications for the entire takeoff
- Added columns Width In x Depth In, Diameter In, Major In x Minor In and Specification Match in Fitting List
What’s new
- Enhanced export to Fixed-Space format file
- Enhanced segmentation of #RE4 fitting (ASI Library)
What’s new
- Added Cut Report
- Added Weight Report With Time
- Added an ability to show FLOOR and ZONE information on the labels and reports
- Enhanced segmentation of #RE4 fitting (ASI Library)
What’s new
- Test Release
- Implemented new PractiCAM database structure
What’s new
- Enhanced PractiCAM security
What’s new
- Added an ability to import metal stock from PractiCAD
What’s new
- Enhanced export takeoffs as fixed space format files
- Enhanced export takeoffs as DBF files
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Enhanced fitting accessories - Dampers & Vanes
- Enhanced Cost Reports
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Added an ability to compact PractiCAM database
- Added marking notches for round & oval dampers
- Enhanced Tee with Round Tap fitting (GalVent Library)
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Enhanced PractiCAM database structure
- Enhanced PractiCAM security
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Test Release
- Enhanced PractiCAM database structure
- Enhanced PractiCAM security
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Added new fittings in GalVent Fitting Library
- Enhanced SMACNA estimation tables
- Enhanced Archive tool for large jobs & drawings
- Enhanced PractiCAM security
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Added an ability to export takeoffs as fixed space format files
- Added an ability to export takeoffs as DBF files
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Added Nominal Types to the Labels & Reports
- Added an ability to adjust specification tables by Depth Out for the fittings that don't have this parameter
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Added an ability to lock fitting parameters
- Added an ability to set negative Lip
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Added an ability to snap to the center of circle in the part editor
- Added an ability to turn off connector cut off feature
- Enhanced data import from previous versions
- Enhanced Round Tap on Plate (PractiCAM Single Wall Library)
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Added an ability to define productivity in hours per square foot
- Added metal stock & lock parameters for the Spiral Pipe
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Added GalVent Fitting Library
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Test Release
- Added GalVent Fitting Library
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Enhanced data import from previous versions
- Enhanced several PractiCAM reports
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Enhanced No Waste Rectangular Straight Duct (PractiCAM Single Wall Library)
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Enhanced PractiCAM specifications
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Test Release
- Enhanced PractiCAM specifications
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Implemented new software security
- Added full screen for 3D fitting preview
- Added Angled Gooseneck with Filter Rack (PractiCAM Single Wall Library)
- Added Icon Rectangular Chase Top N (PractiCAM Single Wall Library)
- Added Deco Top 13 (Roofing Library)
- Added Mitered Eye Duct (PractiCAM Single Wall Library)
- Added ABC Final Report
- Added an ability to snap on intersection in Part Editor
- Added an ability to refresh PractiCAM browser tree
- Added an ability to align text vertically in Text Editor
- Added an ability to save as default parameters for Catalog Items
- Added Radial Lock parameter for the Taps in specifications
- Enhanced Parametric Profiles
- Enhanced Angle Front Elbow fitting and added parameter Filter Rack Option for it
- Enhanced #RE4 (ASI Library)
- Enhanced Trim a Line tool in Part Editor
- Enhanced Quick Takeoff
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Test Release
- Implemented new software security
- Added full screen for 3D fitting preview
- Added Angled Gooseneck with Filter Rack (PractiCAM Single Wall Library)
- Added Icon Rectangular Chase Top N (PractiCAM Single Wall Library)
- Added Deco Top 13 (Roofing Library)
- Added Mitered Eye Duct (PractiCAM Single Wall Library)
- Added ABC Final Report
- Added an ability to snap on intersection in Part Editor
- Added an ability to refresh PractiCAM browser tree
- Added an ability to align text vertically in Text Editor
- Added an ability to save as default parameters for Catalog Items
- Added Radial Lock parameter for the Taps in specifications
- Enhanced Parametric Profiles
- Enhanced Angle Front Elbow fitting and added parameter Filter Rack Option for it
- Enhanced #RE4 (ASI Library)
- Enhanced Trim a Line tool in Part Editor
- Enhanced Quick Takeoff
Please note: This release requires new authorization. If your current PractiCAM system is authorized and your maintenance is up-to-date, your authorization will be free of charge.
What’s new
- Added metric offsets for brake information on labels
What’s new
- Added offsets for brake information on labels
What’s new
- Enhanced import of large amount of data from previous versions
- Enhanced Canopy fittings
What’s new
- Ring Cover (ASI Library)
What’s new
- Enhanced automatic segmentation
- Enhanced import from PractiCAD
What’s new
- Enhanced import of large amount of data from previous versions
- Enhanced acoustic liner information on the labels
What’s new
- Added an ability to make a negative tap allowance on the body for fittings with round taps
- Enhanced smart mapping for import of materials, gauges, allowances, accessories etc. from PractiCAD, ECCAD, CADPIPE & Quote Express Software
What’s new
- Supply (Auxiliary Library)
- Return (Auxiliary Library)
- Curb Adapter (Roofing Library)
- Added Archive tool
- Added an ability to calculate scrap cost in Scrap Inventory
- Added an ability sort Scrap Inventory by material, gauge, etc.
- Enhanced Roof Curb fitting (PractiCAM Single Wall Library)
- Enhanced #RJ6 fitting (ASI Library)
- Enhanced Direction/Distance tool in Part Editor
What’s new
- Added lining allowance for turning vanes
- Add new measurement unit (minutes)
What’s new
- Added radius as a condition for all round elbows in specifications
- Several interface improvements
What’s new
- Added an ability to trim acoustic liner and insulation differently for different connectors
- Added parameter Crotch Width for Rectangular Wye (PractiCAM Single Wall Library)
- Added proper quantity of notches for oval fittings from SPOT Single Wall Library
- Enhanced Transition Small to Large fitting (CAM Library)
- Enhanced F84 - Boot Tee fitting (SDS Library)
- Enhanced CT1R fitting (SPOT Single Wall Library)
- Enhanced CT1 fitting (SPOT Single Wall Library)
- Enhanced CT2R fitting (SPOT Single Wall Library)
- Enhanced CT2 fitting (SPOT Single Wall Library)
- Enhanced Square Throat and Radius Heel Elbow fitting (PractiCAM Single Wall Library)
- Enhanced Angled Tap fitting (PractiCAM Single Wall Library)
- Enhanced Square Tee fitting (PractiCAM Single Wall Library)
- Enhanced Connector Frame Report
- Enhanced round fittings with round taps
What’s new
- Universal Linear Box 2 (PractiCAM Single Wall Library)
- Added an ability to determine total cut length
- Added Cutting Time Report
- Completed ASI Library
What’s new
- Canopy 3 (PractiCAM Single Wall Library)
- Added automatic selection of proper sheet/coil stock
- Added Oval tool in part editor
- Added Move&Rotate tool in part editor & nest
- Added several new fittings in the ASI Library
- Enhanced Deco Top 2 fitting (Roofing Library)
What’s new
- #STE6 (ASI Library)
- #CT6 (ASI Library)
- #ST6 (ASI Library)
- #RT6 (ASI Library)
- #RV9 (ASI Library)
- #GE6 (ASI Library)
- #EC6 (ASI Library)
- #RTE6 (ASI Library)
- #TR6 (ASI Library)
- #RB6 (ASI Library)
- Added new type of notches for round and oval fittings
- Added new tool - Divider in the part editor
- Added rotation step for Rotate tool in part editor & nest
- Enhanced Measure a Distance tool in part editor
What’s new
- Double Pitch Roof Curb (Roofing Library)
- Rectangular End Cap with Round Hole and Notch Back (PractiCAM Single Wall Library)
- Added insulation
- Added Blade Add parameter for round and oval dampers
- Enhanced Isolator Base (Auxiliary Library)
- Enhanced import/export of PractiCAM libraries
What’s new
- Enhanced round and oval vanes
What’s new
- Added Square to Round 2 Straights (PractiCAM Single Wall Library)
- Added Peak Flashing with Pitch (Roofing Library)
- Added Scupper (Auxiliary Library)
- Added Universal Liner Box (Auxiliary Library)
- Added Radius Plenum Rect Hole (Auxiliary Library)
- Added Radius Plenum Round Hole (Auxiliary Library)
- Added Top Feed Reg Box (Auxiliary Library)
- Added Register Box with Round Tap (Auxiliary Library)
- Added Register Box with Oval Tap (Auxiliary Library)
- Enhanced PractiCAM nest
- Enhanced import of tie rods from previous versions
- Enhanced tie rod placement for imported fittings
- Added an ability to set angle for both branches for Round Tapering Y-Branch fitting (PractiCAM Single Wall Library)
- Enhanced Isolator Base fitting (PractiCAM Single Wall Library)
What’s new
- New estimating
What’s new
- Enhanced PractiCAM specifications
What’s new
- Enhanced Coil Report
What’s new
- Added Tracking for Specifications
- Added an ability to set specifications for fittings from Custom Library
What’s new
- Added new segmentation scenarios for several fittings
- Added lock allowance for End Cap fitting (Quote Express Library)
- Enhanced Simple Canvas fitting (Simplified Duct Library)
- Enhanced F-19 Square-to-Round fitting (Quote Express Library)
- Enhanced Cutting Modes
What’s new
- Enhanced automatic segmentation of acoustic lining
- Enhanced PractiCAM reports for new Tie Rods
- Added new Tie Rods for fittings from SPOT Single Wall Library
What’s new
- Enhanced new Tie Rods
What’s new
- Radius Elbow with Special Lock on Straights (PractiCAM Single Wall Library)
- Enhanced 3SD layout for Square-to-Round (PractiCAM Single Wall Library)
- Enhanced feature to add tabbed edge point by point in the Part Editor
What’s new
- Enhanced mark groups
What’s new
- Back Side (Auxiliary Library)
- Enhanced Radius Elbow up to 180 (PractiCAM Single Wall Library)
- Added an ability to track specifications on input for fittings from Custom Library
What’s new
- Enhanced feature to add edge on arc in the Part Editor
What’s new
- Enhanced Flex report
What’s new
- Added new Tie Rods for fittings from Lockformer Single Wall Library
What’s new
- Added new Tie Rods for fittings from PractiCAM Single Wall Library
- Added smart mapping for import of materials, gauges, allowances, accessories etc. from PractiCAD, ECCAD, CADPIPE & Quote Express Software
- Enhanced Round straight cross with Round Taps (PractiCAM Single Wall Library)
- Enhanced Brake Up & Brake Down information on labels and reports
- Enhanced Rectangular Straight Duct with 4 Round Taps (PractiCAM Single Wall Library)
- Enhanced Round Chase Top 1 (PractiCAM Single Wall Library)
- Enhanced nest
- Enhanced Material Use Reports
What’s new
- Double Transition Offset Left (PractiCAM Single Wall Library)
- Finished Length Double Transition Offset Left (PractiCAM Single Wall Library)
- Finished Length Square-to-Round (PractiCAM Single Wall Library)
- Finished Length Square-to-Oval (PractiCAM Single Wall Library)
- Flex report
- Added an ability to show seams on the labels for the segmented fittings only
- Added an ability to choose print or not to print label for the particular fitting blank
- Added an ability to choose print or not to print label for the collars
- Added an ability to match blank picture on the labels with flipped blanks
- Enhanced Bearsmouth fittings (PractiCAM Single Wall Library)
- Enhanced Roof Sleeve fitting (PractiCAM Single Wall Library)
- Enhanced Square-to-Round fitting (PractiCAM Single Wall Library)
- Enhanced Square-to-Oval fitting (PractiCAM Single Wall Library)
- Enhanced Drop Cheek Radius Elbow with Filter Rack fitting (PractiCAM Single Wall Library)
- Improved handling of kerf offset compensation for the Cybermation controllers
- Several interface improvements in the Architectural Items and Profiles
What’s new
- Enhanced communication speed with CNC controllers
What’s new
- Added tool "Bend by line" for rectangular connectors
- Added tool "Bend by line" in the Part Editor for rectangular parts
- Enhanced import of Tie Rods from Quote Express software
What’s new
- New tie rods
- Added new tie rods for fitting from Quote Express library
- Added import of tie rods from Quote Express software
What’s new
- Enhanced import from Quote Express software
What’s new
- Test Release
- Added an ability to map unknown parameters on import from Quote Express software
What’s new
- Test Release
- Added material cost estimation for Custom Parts, Panels, Profiles etc.
- Added cost per square foot for wrap materials
- Enhanced import of PDX files from PractiCAD
- Enhanced fitting Roof Adaptor (PractiCAM Single Wall Library)
- Enhanced fitting Round Tap on Plate (PractiCAM Single Wall Library)
What’s new
- Test Release
- Enhanced CrypKey security features
What’s new
- Test Release
- Added fitting Round Conical Tee with Round Tap (Quote Express Library)
- Added fitting Round Conical Cross with Round Taps (Quote Express Library)
- Added fitting Conical Cross Round Reducing (Quote Express Library)
- Added fitting Lateral Cross Round Reducing (Quote Express Library)
What’s new
- Test Release
- Added an Auxiliary Items Library
- Added fitting Rectangular Louver (Auxiliary Items Library)
- Added fitting Round Drawband (Auxiliary Items Library)
- Added number of blanks for the Hipped Roof fitting (Roofing Library)
- Enhanced fitting Square Tee (CAD Library)
- Enhanced fitting Round Conical Tee with Round (PractiCAM Single Wall Library)
- Enhanced import from Quote Express software
What’s new
- Test Release
- Enhanced fitting Three Way Tee (CAD Library)
- Several Interface improvements
What’s new
- Added fitting Hog Valley Upper Saddle (Roofing Library)
- Added marking notches for Oval Hard Bend Elbows form SPOT Single Wall Library
- Added import of Tie Rods from Quote Express software
- Enhanced fitting Takeoff with Reducing Body and Round Straight Tap (Round) (Lockformer Library)
- Enhanced fitting Round Radius Saddle Conical (SPOT Single Wall Library)
- Enhanced nest procedure
What’s new
- Added Oval Chase Top 1, 2, 3, 4, N fittings in PractiCAM Single Wall Library
- Improved handling of kerf offset compensation for the Cybermation controllers
What’s new
- Enhanced fitting Radius Tee upto 180 degrees (PractiCAM Single Wall)
- Enhanced Quick Input procedure
- Enhanced import from Quote Express software
- Enhanced PractiCAM setup
What’s new
- Rectangular Wye with Crotch Offset and Extra Straights (PractiCAM Single Wall Library)
- Curb1 (Roofing Library)
- Curb2 (Roofing Library)
- Curb3 (Roofing Library)
- Added an ability to adjust distance for the scrap cut off
- Added tool Clear in specifications, for clearing all conditions
from a selected specification tree
- Enhanced blank picture, and label orientation marks for the flipped blanks
What’s new
- Added an ability to print extra fitting labels
- Enhanced procedure of symmetrical nest
- Enhanced Lower Saddle fitting (Roofing Library)
What’s new
- Enhanced several fittings from SPOT Single Wall Library
What’s new
- Enhanced Ridge Flashing fitting (Roofing Library)
- Several Interface improvements
What’s new
- Enhanced nesting procedure
What’s new
- Added fitting quantity for the Quick Input
- Added turning vanes for the Square Branch Tee fittings
- Added volume dampers for fitings from Lockformer Library
- Enhanced Connector Edge Report
- Enhanced Twisted Transition (PractiCAM Single Wall Library)
What’s new
- Enhanced T2R fitting (SPOT Single Wall Library)
- Enhanced T1 fitting (SPOT Single Wall Library)
- Enhanced T2 fitting (SPOT Single Wall Library)
- Enhanced CT1R fitting (SPOT Single Wall Library)
- Enhanced CT1 fitting (SPOT Single Wall Library)
- Enhanced CT2R fitting (SPOT Single Wall Library)
- Enhanced CT2 fitting (SPOT Single Wall Library)
What’s new
- Added Quick Input Tool in takeoff
- Enhanced import from Quote Express software for materials, stocks, rods, vanes
What’s new
- Added an ability to cut holes in Wall Panels
- Added an ability to change edge parameters on the fly in Part Editor
- Enhanced Wall Panels
What’s new
- Added independent setup for the nesting parameters for metal and for liner
- Added Point Move tool in Part Editor
- F-1 Square Elbow (Quote Express Library)
- F-3 Square Elbow (Quote Express Library)
- Rectangular Gooseneck (Quote Express Library)
- Side Feed Reg Box (Quote Express Library)
- Top Feed Reg Box (Quote Express Library)
- Tapered Body Lat.Con. Tap Tee (Quote Express Library)
- Tapered Body Shoe Tap Tee (Quote Express Library)
- Tapered Body Mitered Tap Tee (Quote Express Library)
- Tapered Body Rect Tap Tee (Quote Express Library)
- Tapered Body Lat.Con. Tap Cross (Quote Express Library)
- Tapered Body Shoe Tap Cross (Quote Express Library)
- Tapered Body Mitered Tap Cross (Quote Express Library)
- Tapered Body Rect Tap Cross (Quote Express Library)
What’s new
- F-17 Tapered Tap-In (Quote Express Library)
- Elbow 90 degree (Quote Express Library)
- Elbow (Quote Express Library)
- Gooseneck (Quote Express Library)
- Pants Wye (Quote Express Library)
- Bullhead Tee (Quote Express Library)
- Mitered Elbow 2 gore (Quote Express Library)
- Tapered Body Tap Tee (Quote Express Library)
- Tapered Body Lat. Tap Tee (Quote Express Library)
- Straight Body Tap Cross (Quote Express Library)
- Straight Body Lat. Tap Cross (Quote Express Library)
- Straight Body Con Tap Cross (Quote Express Library)
What’s new
- Square Elbow (Quote Express Library)
- Square 45 Elb (Quote Express Library)
- Radius Elbow (Quote Express Library)
- 45 Radius Elbow (Quote Express Library)
- Transition (Quote Express Library)
- Offset (Quote Express Library)
- Radius Offset (Quote Express Library)
- Bullhead Tee(Rect) (Quote Express Library)
- Radius Bullhead(Rect) (Quote Express Library)
- Box (Quote Express Library)
- End Cap (Quote Express Library)
- Oval Pipe (Quote Express Library)
- Hard Oval Mitered Elbow (Quote Express Library)
- Oval Mitered Elbow (Quote Express Library)
- Hard Oval Bullhead Tee (Quote Express Library)
- Oval Wye Hard (Quote Express Library)
- Oval Wye Soft (Quote Express Library)
- Oval Eccentric Reducer (Quote Express Library)
- Oval Concentric Reducer (Quote Express Library)
- Oval End Cap (Quote Express Library)
- Enhanced import from Quote Express software
What’s new
- Reg Box on Round Pipe 2 Joints (Roofing Library)
- Added several finished length transitions in PractiCAM Single Wall Library
- Added all fittings in Quote Express Library
- Finished import of raw data from Quote Express software
- Enhanced Round Reducer fitting (PractiCAM Single Wall Library)
- Enhanced Slanted Elbow fitting (PractiCAM Single Wall Library)
- Enhanced CT1 fitting (SPOT Single Wall Library)
- Enhanced CT1R fitting (SPOT Single Wall Library)
- Enhanced CT2 fitting (SPOT Single Wall Library)
- Enhanced CT2R fitting (SPOT Single Wall Library)
What’s new
- Improved connectors handling for the Square-to-Round/Square-to-Oval fittings
What’s new
- Boot Flat Saddle Tee (SPOT Single Wall Library)
- Deco Top 7 (Roofing Library)
- Deco Top 8 (Roofing Library)
- Universal Corner (Roofing Library)
- Inside Corner (Roofing Library)
- Kicker (Roofing Library)
- Upper Saddle (Roofing Library)
- Lower Saddle (Roofing Library)
- Roof Finial (Roofing Library)
- Flaring Pan (Roofing Library)
- Added several finished length transitions in PractiCAM Single Wall Library
- Added marking notches for all round fittings in SPOT Single Wall Library
- Enhanced Right Facing Double Radius Offset (radius entered) (Rectangular) fitting (Lockformer Library)
- Enhanced Left Facing Double Radius Offset (radius entered) (Rectangular) fitting (Lockformer Library)
- Enhanced T1R fitting (SPOT Single Wall Library)
- Enhanced CT1R fitting (SPOT Single Wall Library)
- Enhanced CT1 fitting (SPOT Single Wall Library)
- Enhanced CT2R fitting (SPOT Single Wall Library)
- Enhanced CT2 fitting (SPOT Single Wall Library)
What’s new
- 90 degrees Throat Gooseneck (PractiCAM Single Wall Library)
- Angle Front Elbow (PractiCAM Single Wall Library)
- Round Tapped Elbow Gored 3 (PractiCAM Single Wall Library)
- Round Tapped Elbow Gored 4 (PractiCAM Single Wall Library)
- Round Tapped Elbow Gored 5 (PractiCAM Single Wall Library)
- Round Tapped Elbow Gored 6 (PractiCAM Single Wall Library)
- Round Tapped Elbow Gored N (PractiCAM Single Wall Library)
- Round Flat Saddle Conical (SPOT Single Wall Library)
- Round Radius Saddle Conical (SPOT Single Wall Library)
- Round Flat Saddle Lateral (SPOT Single Wall Library)
- Round Radius Saddle Lateral (SPOT Single Wall Library)
- Round Flat Saddle Tee (SPOT Single Wall Library)
- Round Radius Saddle Tee (SPOT Single Wall Library)
- Round End Cap (SPOT Single Wall Library)
- Round End Caps with Round Hole (SPOT Single Wall Library)
- C/L Rectangle To Round (SPOT Single Wall Library)
- Offset Rectangle To Round (SPOT Single Wall Library)
- Enhanced ER1 fitting (SPOT Single Wall Library)
- Enhanced L1 fitting (SPOT Single Wall Library)
- Enhanced L2 fitting (SPOT Single Wall Library)
- Enhanced L2R fitting (SPOT Single Wall Library)
- Enhanced T1 fitting (SPOT Single Wall Library)
- Enhanced T2 fitting (SPOT Single Wall Library)
- Enhanced T2R fitting (SPOT Single Wall Library)
- Enhanced Rotate tool in the Part Editor
What’s new
- Deco Top 3 fitting (Roofing Library)
- Deco Top 4 fitting (Roofing Library)
- Deco Top 5 fitting (Roofing Library)
- Deco Top 6 fitting (Roofing Library)
- Enhanced universal connector/lock interaction
- Enhanced Rectangular Chase Top N fitting (PractiCAM Single Wall Library)
What’s new
- Added Roofing Library
- Deco Top 1 (Roofing Library)
- Deco Top 2 (Roofing Library)
- Tap for Grill on Round Pipe fitting (PractiCAM Single Wall Library)
- Takeoff with Reducing Body and Oval Boot (Oval) fitting (Omni Duct Single Wall Library)
- Takeoff with Reducing Body and Reducing Oval Tap (Oval) fitting (Omni Duct Single Wall Library)
- Takeoff with Reducing Body and Round Boot (Oval) fitting (Omni Duct Single Wall Library)
- Takeoff with Reducing Body and Straight Oval Tap (Oval) fitting (Omni Duct Single Wall Library)
- Improved cut quality of the "Fish" for Round & Oval Elbows
- Enhanced R1 fitting (SPOT Single Wall Library)
- Enhanced Takeoff with Reducing Body and Round Boot (Lockformer Library)
- Enhanced universal connector/lock interaction
What’s new
- Added data import from QuoteExpress software
- Implemented universal connector/lock interaction for rounded connectors
- Enhanced fitting Rectangular End Cap with Notch Back (PractiCAM Single Wall Library)
What’s new
- Implemented universal connector/lock interaction
What’s new
- Enhanced blank numbering on the sheet labels and reports
What’s new
- Added fitting Adjustable Storm Collar (PractiCAM Single Wall Library)
- Added fitting Plumber's Flashing (Regular Base) (PractiCAM Single Wall Library)
- Added diameter as a sorting parameter for labels
- Added an ability to print decimals for Brake Degrees/Inches on the labels
- Added an ability to set allowances for Radius Vanes
- Enhanced fitting R1 (SPOT Single Wall Library)
- Enhanced fitting Round Tee with Standard Rectangular Transition Tap (PractiCAM Single Wall Library)
- Enhanced segmentation for Ogee Transitions and Double Transition Offsets
- Enhanced Cutting Modes, Marking Modes and Software Kerf tables
What’s new
- Added fitting Round Saddle Tap Flat (Omni Duct Single Wall Library)
- Added fitting Round Conical Saddle Flat (Omni Duct Single Wall Library)
- Added fitting Round End Cap (Omni Duct Single Wall Library)
- Added fitting Round Low Loss Tee (Omni Duct Single Wall Library)
- Added fitting Angled Platform Cover (PractiCAM Single Wall Library)
- Improved handling of the custom fitting modifications for lined fittings
- Several interface enhancements
What’s new
- Added new fitting library — Omni Duct Single Wall
- Added an ability to create connectors which can be wider than fitting blank
- Added several new connector appearances: 3-Way, Flange In, Hammer Lock, Slip & Slip
- Added Cost parameter for insulation stocks
What’s new
- Added fitting Rectangular Angled Tap on Round (PractiCAM Single Wall Library)
- Added visual 3D view feedback for a proper allowance selection
- Added new tool in part editor — Offset
- Added new tool in part editor — Chamfer
- Added new tool in part editor — Fillet
- Added new tool in part editor — Extend
- Added new tool in part editor — Trim function
- Added new tool in part editor — Snap-toggle to the center of a line
- Enhanced Cutting Modes, Marking Modes and Software Kerf tables
- Improved handling of Tabbed Joints
What’s new
- Added fitting Curb with Double Pitch (PractiCAM Single Wall Library)
- Added fitting Isolator Base (PractiCAM Single Wall Library)
- Added fitting Isolator Curb (PractiCAM Single Wall Library)
- Added fitting Adjustable Curb (PractiCAM Single Wall Library)
- Added an ability to set cost for each coil metal stock
- Added estimation tables for Round to Square and Round to Oval fittings
- Enhanced Wall Panel Assemblies
What’s new
- Added fitting Square/Radial Tee (PractiCAM Single Wall Library)
- Added fitting Square-to-Oval Elbow (PractiCAM Single Wall Library)
- Added fitting Square-to-Round Elbow (PractiCAM Single Wall Library)
- Added fitting Spiral Pipe (SPOT Single Wall Library)
- Added fitting Longitudinal Duct (SPOT Single Wall Library)
- Added an option to cut off the coil
What’s new
- Enhanced Round Tee with Square Tap w/o Radial Joint (PractiCAM Single Wall Library)
- Enhanced Round Tee with Square Tap Two Tap Joints (PraciCAM Single Wall Library)
- Enhanced segmentation of symmetrical parts
- Enhanced blank numbering on the sheet labels and reports
What’s new
- Rectangular End Cap with Round Tap fitting (PractiCAM Single Wall Library)
- Rectangular Straight Duct with Filter Rack fitting (PractiCAM Single Wall Library)
- Round Tee with Square Tap 2 Joints fitting (PractiCAM Single Wall Library)
- Square Tap on Plate 2 Joints fitting (PractiCAM Single Wall Library)
- Barrel Offset with Straight fitting (PractiCAM Single Wall Library)
What’s new
- Enhanced cost estimation
What’s new
- Added an ability to set symmetrical locks for sevaral fittings from PractiCAM Single Wall library
- Changed Tap Base Diameter dimentiontioning for all fittings with taps from PractiCAM Single Wall library and from SPOT Single Wall library
- Enhanced wall panels
What’s new
- End Cap with Notch Back fitting (PractiCAM Single Wall)
- Enhanced Tie Rods
What’s new
- Chimney Saddle 2 fitting (PractiCAM Single Wall Library)
- Chimney Saddle 3 fitting (PractiCAM Single Wall Library)
- RTU Curb fitting (PractiCAM Single Wall Library)
- RTU Curb Adaptor fitting (PractiCAM Single Wall Library)
- Roofcurb Adaptor fitting (PractiCAM Single Wall Library)
- Roofcurb Adaptor with Framed Cover fitting (PractiCAM Single Wall Library)
- Barrel Offset fitting (PractiCAM Single Wall Library)
- Added an ability to change the order of Labels, Reports, Specifications & Allownaces
- Enhanced ABC Sheet shear report
- Reduced nesting time
What’s new
- Added an ability to change the order of size breaks in Specifications
- Added an ability to set Hat Height parameters for Dampers in Specifications
- Improved handling of tabbed locks
What’s new
- Added Leader Head fitting (PractiCAM Single Wall Library)
- Added Chimney Saddle fitting (PractiCAM Single Wall Library)
- Added Filter Rack 1 Slot fitting (PractiCAM Single Wall Library)
- Added Y2 3 Joints Adjustable Legs fitting (SPOT Single Wall Library)
- Added an ability to copy size breaks from one specification table to another
- Reduced loading time
- Enhanced round & oval dampers
- Enhanced Mirror tool in the part editor
What’s new
- Enhanced PractiCAM Software Request module
- Enhanced Drop Cheek Elbows (PractiCAM Single Wall Library)
- Enhanced handling of default values in Custom Fitting Library
What’s new
- Curb Adaptor (PractiCAM Single Wall Library)
- Modified File transfer type cutter drivers
What’s new
- Enhanced Transition Y Branch 90 fitting (PractiCAM Single Wall Library)
- Enhanced Radial Bearsmouth fitting (PractiCAM Single Wall Library)
- Enhanced Angled Bearsmouth fitting (PractiCAM Single Wall Library)
- Enhanced Round-to-Square fitting (PractiCAM Single Wall Library)
What’s new
- Enhanced the import of Specifications from CAM
What’s new
- Enhanced Straight Duct fitting (to be burned on table) (Lockformer library)
- Enhanced Contour/Element Allowance tool in the Part Editor
- Added three Weight reports for Label Only Straight Duct
- Added an ability to show Fitting Comments on labels and reports and added a new Remarks property
- Corrected application of notching allowances in autosegmentation
What’s new
- Added Canopy 2 fitting (PractiCAM Single Wall Library)
- Added second lock for Square-to-Round and Square-to-Oval fittings
What’s new
- Added Radial Lock parameter for Radius Taps
- Enhanced Damper Sleeve fittings (PractiCAM Single Wall Library)
What’s new
- Enhanced 3D view for alpha parts
What’s new
- Added Damper Sleeve 1 — 4 fittings (Dimensions on Hat) (PractiCAM Single Wall Library)
- Added Add Empty Sheet tool to Preparation module
- Added visual 3D view feedback for a proper blank selection
What’s new
- Enhanced Canopy fitting (PractiCAM Single Wall Library)
What’s new
- Added lbs as Weight units for the Metric mode
- Enhanced Material Use List Report
- Enhanced Rod placement
What’s new
- Added Wall Panel Assemblies
- Added Connectors Out Left & Out Right for Mushroom Hood fittings
What’s new
- Added Wall Panels (Architectural Items)
- Added an ability to create bins for Wall Panels
What’s new
- Added an ability to import Spiral Pipe from CAD takeoffs
- Enhanced Rectangular parts with 2,3,4,5 and 6 round holes
What’s new
- Enhanced Normal Transition fitting (CAD Library)
- Enhanced Extra Straight Transition fitting (CAD Library)
- Enhanced Square-to-Round fitting (CAD Library)
What’s new
- Added Finished Length Transition Type 2 fitting (PractiCAM Single Wall Library)
What’s new
- Enhanced Simple Canvas fitting (Simplified Duct Library)
- Enhanced Oval Taps fittings (CAD Library)
- Enhanced Flanged T-Taps fittings (CAD Library)
What’s new
- Added an ability to import Tap placement from CAD takeoff for Rectangular Duct
- Enhanced Tapered Tee fitting (CAD Library)
- Enhanced Conical T-Tap/Saddle fitting (CAD Library)
- Enhanced Straight Cross fitting (CAD Library)
- Enhanced Oval Y Branch (Hard) fitting (CAD Library)
- Enhanced Oval Y Branch (Soft) fitting (CAD Library)
- Enhanced Oval Normal Tee fitting (CAD Library)
- Enhanced all Oval fittings from CAD Library
What’s new
- Enhanced Square-to-Oval (Normal) fitting (CAD Library)
- Enhanced Square-to-Oval (Twisted) fitting (CAD Library)
- Enhanced Elbows Gored 3, 4 and 5 fittings (CAD Library)
- Enhanced Standard Y Branch fitting (CAD Library)
- Enhanced Straight Tee fitting (CAD Library)
- Enhanced Conical Tee fitting (CAD Library)
- Enhanced Bullhead Tee fitting (CAD Library)
- Enhanced Rectangular Tap fitting (CAD Library)
- Enhanced LoLoss Cross fitting (CAD Library)
- Enhanced Round-to-Square fitting (CAD Library)
- Enhanced Oval Transition (Normal) fitting (CAD Library)
- Enhanced Oval Transition (Twisted) fitting (CAD Library)
- Enhanced Oval-to-Round fitting (CAD Library)
- Enhanced Oval-to-Square (Normal) fitting (CAD Library)
- Enhanced Oval-to-Square (Twisted) fitting (CAD Library)
What’s new
- Enhanced Straight Duct fitting (CAD Library)
- Enhanced Radius Elbow fitting (CAD Library)
- Enhanced Square Elbow fitting (CAD Library)
- Enhanced Radius Tee fitting (CAD Library)
- Enhanced Ogee Transition fitting (CAD Library)
- Enhanced X-Straight Transition fitting (CAD Library)
- Enhanced Z-Transition fitting (CAD Library)
- Enhanced Square-to-Round fitting (CAD Library)
- Enhanced Three Way Tee fitting (CAD Library)
- Enhanced Branch Tee fitting (CAD Library)
- Enhanced Wye fitting (CAD Library)
- Enhanced Sleeves fittings (CAD Library)
What’s new
- Added Square Throat and Radius Heel Elbow fitting (PractiCAM Single Wall Library)
- Added Transition Different Straights fitting (PractiCAM Single Wall Library)
- Added Scale tool to the Part Editor
- Added Mirror tool to the Part Editor
- Added Number of Blanks parameter for selected fittings from
CAM and CAD library
- Added an ability to Create a New Accessory from an existing one
What’s new
- Added Radial Lock parameter to radial fittings
from the following libraries: PractiCAM Single Wall,
PractiCAM Double Wall, Lockformer, Cybermation,
Simplified Duct, CAD and CAM
What’s new
- Enhanced PractiCAM Reports
What’s new
- Added Radius Elbow with Filter Rack fitting (PractiCAM Single Wall Library)
- Added an ability to cut precision loops at corners
- Added a driver for ACS Coil Line — Jubilee Download
What’s new
- Added Wraparound Radius Tap fitting (PractiCAM Single Wall Library)
- Added Enhanced Transitions fitting (PractiCAM Single Wall Library)
What’s new
- Added an ability to copy PractiCAM Libraries from Standard to Metric mode
- Added an ability to save PractiCAM Libraries in Metric mode
What’s new
- Added Finished Length Double Transition Offset fitting (PractiCAM Single
Wall Library)
- Added Import/Export of Catalog items
- Enhanced 45 Degree Boot Tap fitting (Simplified Duct Library)
- Enhanced Saddle Tap fitting (Simplified Duct Library)
- Added break notches on Radial Bearsmouth fitting (PractiCAM Single Wall Library)
What’s new
- Added an ability to manipulate the bend information on labels
- Added an ability to manipulate the roll information on labels
- Enhanced Radius vanes
- Eliminated multiple instances of items in reports
What’s new
- Added Round Tee with Square Tap w/o Radial Joint fitting (PractiCAM Single Wall Library)
- Added Square Gooseneck Two Locks fitting (PractiCAM Single Wall Library)
- Enhanced Import/Export procedures
What’s new
- Added an ability to create multiple condition sets by largest side in Specifications
What’s new
- Added an ability to make Drain Pan fitting using 2 blanks
- Enhanced Wye Type Fittings (PractiCAM, CAM,
CAD Single Wall Libraries)
- Enhanced Bearsmouth Type Fittings (PractiCAM Single Wall Library)
- Added default Depth/Width option for Rods
- Corrected Specification Information appearance in Reports and Labels
What’s new
- Enhanced 45 Degree Boot Tap fitting (Simplified Duct Library)
- Enhanced PractiCAM Labels
- Added 5 blanks layout for all Mushroom Hoods
- Added more baud rates to communication settings
- Added an ability to use Connector Add parameter for any fitting
What’s new
- Added Triangle Radius Mushroom Hood fitting (PractiCAM Single Wall Library)
- Added Nocut Sheet parts with 1, 2, 3, 4, 5, 6 & N Round Holes
- Enhanced Square Roof Jack fitting (Simplified Duct Library)
- Enhanced Rectangular Offset fitting (Simplified Duct Library)
- Enhanced Doghouse fitting (Simplified Duct Library)
What’s new
- Enhanced ABC Cost Report with Labor Cost
What’s new
- Enhanced PractiCAM labels
What’s new
- Added an ability to set a negative value for Blade Add for Volume Dampers
- Added a marking notch for Rectangular Volume Dampers
- Enhanced export of custom libraries (Fittings and Parts)
- Enhanced Roof Jack on Pitch fitting (PractiCAM Single Wall Library)
What’s new
- Added Mushroom Hood fittings (PractiCAM Single Wall Library)
- Added Round Mitered Elbow Trimmed Lock with Extra Vane fitting (SPOT Single Wall Library)
- Added BTR with Extra Vane fitting (SPOT Single Wall Library)
- Added new items into Catalog Items Library
What’s new
- Enhanced Architectural Items
- Enhanced Round Straight Duct fitting (PractiCAM Single Wall Library)
- Enhanced Round Tee with Boot Tap fitting (PractiCAM Single Wall Library)
- Enhanced Y2 3 Joints fitting (Spot Single Wall Library)
- Enhanced L2R fitting (Spot Single Wall Library)
- Enhanced L1 fitting (Spot Single Wall Library)
- Enhanced L1R fitting (Spot Single Wall Library)
- Enhanced T1 fitting (Spot Single Wall Library)
- Enhanced Alpha Part input procedure
What’s new
- Enhanced Architectural Items
What’s new
- Added Rectangular Square throat/Radius heel Elbow 2 locks fitting (PractiCAM Single Wall Library)
- Added an ability to specify the quantity of printed copies for each report
- Enhanced DXF/DWG export
- Enhanced Acoustic Lining reports
- Enhanced labels sorting
What’s new
- Architectural Items
What’s new
- Enhanced Awning Hood fitting (PractiCAM Single Wall Library)
- Enhanced Radius Hood fitting (PractiCAM Single Wall Library)
- Enhanced ABC Cost Report with Labor Cost
What’s new
- Enhanced data import from previous PractiCAM installations
What’s new
- Added Canopy fitting (PractiCAM Single Wall Library)
- Enhanced Oval Hard Bullhead Tee fitting (PractiCAM Single Wall Library)
- Enhanced Flat Saddle Takeoff fitting (SPOT Single Wall Library)
- Enhanced PractiCAM Labels
- Added new items into Catalog Items Library
What’s new
- Added Awning Hood fitting (PractiCAM Single Wall Library)
- Added Radius Hood fitting (PractiCAM Single Wall Library)
- Added Filter Rack Cabinet fitting (PractiCAM Single Wall Library)
What’s new
- Added an ability to set the material weight per square foot in Materials Library
- Added new items into Catalog Items Library
- Enhanced Depth In, Depth Out and Offsets dimensioning for non-PractiCAM Transitions
- Enhanced PractiCAM Reports
What’s new
- Enhanced Two Way Splitter fitting (PractiCAM Single Wall Library)
- Enhanced Radial Branch Tee up to 180 degrees fitting (PractiCAM Single Wall Library)
- Enhanced RS fitting (Cybermation Library)
- Enhanced FD2 fitting (Cybermation Library)
- Enhanced YS fitting (Cybermation Library)
- Enhanced C4700 fitting (Cybermation Library)
- Enhanced Tap dimensioning
What’s new
- Added an ability to set Multiple Condition Sets in PractiCAM Specifications
- Enhanced Tie Rods
What’s new
- Added new types of Tie Rods for Rectangular Straight Duct
What’s new
- Enhanced Shear Report
- Enhanced PractiCAM Labels
What’s new
- Added import from CADPipe
What’s new
- Enhanced Round Tee with LoLoss Tap fitting (PractiCAM Single Wall Library)
- Enhanced Round Straight Cross with Conical Taps fitting (PractiCAM Single Wall Library)
- Enhanced Round Straight Cross with Round Taps fitting (PractiCAM Single Wall Library)
- Enhanced Round Conical Cross with LoLoss Taps fitting (PractiCAM Single Wall Library)
- Enhanced Round Conical Cross with Conical Taps fitting (PractiCAM Single Wall Library)/
-
- Enhanced Round Tee with 2 Square Taps fitting (PractiCAM Single Wall Library)
- Enhanced Round Conical Cross with N Round Conical Taps fitting (PractiCAM Single Wall Library)
- Enhanced Round Conical Tee with Round Tap fitting (PractiCAM Single Wall Library)
- Enhanced Round Damper fitting (PractiCAM Single Wall Library)
- Enhanced Oval Cross with Conical Taps fitting (PractiCAM Single Wall Library)
- Enhanced Oval Cross with Oval Taps fitting (PractiCAM Single Wall Library)
- Enhanced Hold Tool in the Part Editor
What’s new
- Added Square Elbow with Rectangular Taps fitting (PractiCAM Single Wall Library)
- Added notches to mark rod placement for Volume Dampers
- Added Corner notches for Volume Dampers
- Enhanced Marking Notches for locks with zero allowances
- Enhanced piece numbering procedures
What’s new
- Added Linear Box 1 fitting (PractiCAM Single Wall Library)
- Added Linear Box 2 fitting (PractiCAM Single Wall Library)
- Enhanced Square Roof Jack fitting (Simplified Duct Library)
- Enhanced 4' Straight Duct fitting (Simplified Duct Library)
- Added an ability to create and organize Catalog Item Libraries
- Added new Catalog Items
What’s new
- Added Straight Duct with Tap fitting (PractiCAM Single Wall Library)
- Added Straight Duct with 2 Taps fitting (PractiCAM Single Wall Library)
- Enhanced Rectangular Slanted Elbow (PractiCAM Single Wall Library)
- Enhanced Pan (PractiCAM Single Wall Library)
- Added an ability to import takeoffs from CADPipe for Rectangular Fittings
- Added an ability to adjust final Fitting price
(add extra charges or subtract discounts)
- Added an ability to split label printouts by metal sheets
- Added an ability not to print reports which have no data to display
What’s new
- Enhanced lead saving procedure
- Enhanced procedure of sending software requests
- Enhanced acoustic liner nesting procedure
What’s new
- Added Rectangular Straight Duct (SPOT Dual Wall)
- Added No Waste Rectangular Straight Duct fitting (SPOT Dual Wall)
- Added Two-lock Transition fitting (SPOT Dual Wall)
- Added Square Elbow fitting (SPOT Dual Wall)
- Added Radius Elbow fitting (SPOT Dual Wall)
- Added Offset fitting (SPOT Dual Wall)
- Added Shoe Tap fitting (SPOT Dual Wall)
- Added Straight Tap fitting (SPOT Dual Wall)
- Added End Cap fitting (SPOT Dual Wall)
- Added an ability to set straights to "0" for Radius Elbows up to 180 degrees (Right & Left)
- Added the ability to nest a takeoff for multiple cutters
What’s new
- Extended settings for the system units (geometry, weight and money)
- Added F103 — F/O Radius Saddle Lateral fitting (SDS Library)
- Enhanced fitting F29 — Pan w Side Hole fitting (SDS Library)
- Enhanced fitting Roof Curb fitting (PractiCAM Single Wall Library), added parameter Overhang Depth
What’s new
- Added an ability to place a previously prepared hole on a fitting in 3D view
- Added 4 Foot Straight Duct fitting (Simplified Duct Library)
- Added 2 Simple Canvas Connector fittings (Simplified Duct Library)
- Enhanced Bearsmouth fittings (PractiCAM Single Wall Library)
- Enhanced Ogee Offset fitting (Simplified Duct Library)
- Added 3 new Ductmate connectors DM25, DM35, DM45 in PractiCAM Rectangular Connectors Library
What’s new
- Enhanced an ability to move focus from one value
to the next one on 3D preview
- Added buttons on Preparation screen to scroll sheets
- Added 3, 5, 6, 8, 16, 32 as a Number of Blanks for Rain Flange fitting(PractiCAM Single Wall Library)
What’s new
- Added Transition (Different Straights) fitting (PractiCAM Double Wall Library)
- Added Boot Tap fitting (PractiCAM Double Wall Library)
- Added Round Tee with Standard Rectangular Transition Tap fitting (PractiCAM Single Wall Library)
- Added Angle Throat and Heel Elbow (Constant Width) fitting (PractiCAM Single Wall Library)
- Added Angled Bearsmouth fitting (PractiCAM Single Wall Library)
- Added Radial Bearsmouth fitting (PractiCAM Single Wall Library)
- Added Rectangular Plug fitting (PractiCAM Double Wall Library)
- Added Round Plug fitting (PractiCAM Double Wall Library)
- Added Oval Plug fitting (PractiCAM Double Wall Library)
- Added an ability to make Transition fitting (PractiCAM Single Wall Library) from 3 blanks
- Added an ability to move the focus from one value to another on 3D preview
- Added new notch types: Mark and Bend
What’s new
- Added a new Fitting Library (Simplified Duct)
- Added Ogee Offset fitting (Simplified Duct Library)
- Added Transition fitting (Simplified Duct Library)
- Added 90 Degree Radius Elbow fitting (Simplified Duct Library)
- Added 45 Degree Radius Elbow fitting (Simplified Duct Library)
- Added 90 Degree Square Throat and Radius Heel Elbow fitting (Simplified Duct Library)
- Added 90 Degree Square Elbow fitting (Simplified Duct Library)
- Added 45 Degree Square Elbow fitting (Simplified Duct Library)
- Added Concentric Square-to-Round fitting (Simplified Duct Library)
- Added Concentric Round To Round fitting (Simplified Duct Library)
- Added 5 Foot Straight Duct fitting (Simplified Duct Library)
- Added Rectangular Slanted Elbow fitting (PractiCAM Single Wall Library)
- Enhanced CAD Pickoffs import
What’s new
- Added Adjustable Angle Tap fitting (PractiCAM Single Wall Library)
- Added Transition Y Branch 90 fitting (PractiCAM Single Wall Library)
- Added Maximum Blank Size parameter forRectangular Boot Tap fitting (PractiCAM Single Wall Library)
What’s new
- Added vanes information on PractiCAM labels
- Added number of blanks in specifications for a fitting and for a group of fittings
- Added parameters of Double Wall fittings to specifications
- Enhanced 3D Fitting View and Blank pictures on the labels — added an ability to see cutouts made in Part Editor
- Enhanced Radial Vane Report
- Enhanced nesting procedures
What’s new
- Added an ability to set shapes and sizes for Lead In and Lead Out
- Enhanced view of lock and connector data on the labels for double wall fittings
What’s new
- Enhanced Scrap cutting procedure
What’s new
- Added F101 — Flat Oval Radius Saddle Tee fitting (SDS Fitting Library)
- Added F102 — Flat Oval Flat Saddle Tee fitting (SDS Fitting Library)
- Added F106 — Flat Oval Flat Saddle Conical Tee fitting (SDS Fitting Library)
- Added F112 — Flat Oval Conical Lateral fitting (SDS Fitting Library)
- Added F120 — Flat Oval Conical Lateral Cross fitting (SDS Fitting Library)
- Added F121 — Flat Oval Boot Cross fitting (SDS Fitting Library)
- Added F124 — Flat Oval Boot Tee fitting (SDS Fitting Library)
- Added F132 — Flat Oval Three Piece Wye fitting (SDS Fitting Library)
What’s new
- Added F36 — Rectangular Saddle Off Round Pipe fitting (SDS Fitting Library)
- Added F52 — Gored Elbow fitting (SDS Fitting Library)
- Added F53 — Offset fitting (SDS Fitting Library)
- Added F54 — 45 Degree Lateral fitting (SDS Fitting Library)
- Added F55 — Tee fitting (SDS Fitting Library)
- Added F56 — Conical Tee fitting (SDS Fitting Library)
- Added F61 — Conical Tee With Reducer fitting (SDS Fitting Library)
- Added F62 — Conical Tee Cross With Reducer fitting (SDS Fitting Library)
- Added F63 — Lateral With Reducer fitting (SDS Fitting Library)
- Added F64 — Lateral Cross With Reducer fitting (SDS Fitting Library)
- Added F65 — Tee With Reducer fitting (SDS Fitting Library)
- Added F66 — Tee Cross With Reducer fitting (SDS Fitting Library)
- Added F69 — Transition fitting (SDS Fitting Library)
- Added F76 — Roof Jack fitting (SDS Fitting Library)
What’s new
- Added Round Damper (PractiCAM Single Wall Library)
- Added Round End Cap with Round Hole (PractiCAM Double Wall Library)
What’s new
- Added Comments field for the fitting in Fitting Editor
- Added Export/Import for Catalog items
- Added new fittings to SPOT library — T2, T2R, CT2, CT2R, L2, L2R, 2-piece elbow
What’s new
- Added an ability to show blank orientation on the labels as an arrow
What’s new
- Added F25 — 180 Degree Gooseneck fitting (SDS Fitting Library)
- Added F27 — Wye Branch fitting (SDS Fitting Library)
- Added F29 — Pan With Side Hole fitting (SDS Fitting Library)
- Added F117 — Flat Oval Cross fitting (SDS Fitting Library)
- Added F118 — Flat Oval Lateral Cross fitting (SDS Fitting Library)
- Added F119 — Flat Oval Conical Cross fitting (SDS Fitting Library)
- Added F125 — Flat Oval Mitered Wye fitting (SDS Fitting Library)
- Added F105 — Flat Oval Radius Saddle Conical Tee fitting (SDS Fitting Library)
- Added F107 — C/L Rectangle to Flat Oval fitting (SDS Fitting Library)
- Added F108 — Offset Rectangle to Flat Oval fitting (SDS Fitting Library)
- Added F110 — Flat Oval Lateral fitting (SDS Fitting Library)
- Added F111 — Flat Oval Conical Tee fitting (SDS Fitting Library)
- Added F113 — Flat Oval Offset Tee fitting (SDS Fitting Library)
- Added F114 — Flat Oval C/L Transition fitting (SDS Fitting Library)
- Added F115 — Flat Oval Offset Transition fitting (SDS Fitting Library)
- Added F109 — Flat Oval Tee fitting (SDS Fitting Library)
- Added F139 — Flat Oval Elbow With Reducer fitting (SDS Fitting Library)
What’s new
- Added F22 — Radius Tee fitting (SDS Fitting Library)
- Added F30 — 135 Degree Square Throat Gooseneck fitting (SDS Fitting Library)
- Added F34 — Mitered Duct fitting (SDS Fitting Library)
- Added F41 — Square Offset fitting (SDS Fitting Library)
- Added F48 — Mitered Transition fitting (SDS Fitting Library)
- Added F50 — Square to Round fitting (SDS Fitting Library)
- Added F67 — Radius Saddle Takeoff fitting (SDS Fitting Library)
- Added F68 — Flat Saddle Takeoff fitting (SDS Fitting Library)
- Added F74 — Offsetting Square to Round fitting (SDS Fitting Library)
- Added F84 — Boot Tee fitting (SDS Fitting Library)
- Added F85 — Boot Cross fitting (SDS Fitting Library)
- Added F100 — Flat Oval Straight Duct fitting (SDS Fitting Library)
- Added F103 — Flat Oval Radius Saddle Lateral fitting (SDS Fitting Library)
- Added F104 — Flat Oval Saddle Lateral fitting (SDS Fitting Library)
- Added F122 — Flat Oval Reducing Gored Elbow fitting (SDS Fitting Library)
- Added F123 — Flat Oval Reducing Offset fitting (SDS Fitting Library)
- Added F130 — Flat Oval 90 Elbow With Vanes fitting (SDS Fitting Library)
- Added F132 — Flat Oval Three Piece Wye fitting (SDS Fitting Library)
- Added support for all models of Cybermation cutters
What’s new
- Added color/value relationship for data for labels and reports
What’s new
- Added Radius Elbow 2 Locks fitting (PractiCAM Single Wall Library)
What’s new
- Enhanced view of the bend data on dynamic labels
- Added FE — End Cap fitting (SDS Fitting Library)
- Added F0 — Straight Duct fitting (SDS Fitting Library)
- Added F1 — Square 90 Degree Elbow fitting (SDS Fitting Library)
- Added F2 — Square Throat Radius Heel Elbow fitting (SDS Fitting Library)
- Added F3 — Angle Elbow fitting (SDS Fitting Library)
- Added F4 — Radius Elbow fitting (SDS Fitting Library)
- Added F5 — Square Tee fitting (SDS Fitting Library)
- Added F6 — Left to Right O.G. Offset fitting (SDS Fitting Library)
- Added F7 — Transition L to R O.G. Offset fitting (SDS Fitting Library)
- Added F8 — Transition R to L O.G. Offset fitting (SDS Fitting Library)
- Added F9 — R to L Dog Leg Offset fitting (SDS Fitting Library)
- Added F10 — Straight Left Transition fitting (SDS Fitting Library)
- Added F11 — Straight Left Transition fitting (SDS Fitting Library)
- Added F12 — Centerline Transition fitting (SDS Fitting Library)
- Added F13 — Transition R to L Dog Leg Offset fitting (SDS Fitting Library)
- Added F14 — Transition L to R Dog Leg Offset fitting (SDS Fitting Library)
- Added F15 — Radius Tap fitting (SDS Fitting Library)
- Added F16 — Angle Tap fitting (SDS Fitting Library)
- Added F17 — Straight Tap fitting (SDS Fitting Library)
- Added F18 — Transition Offset fitting (SDS Fitting Library)
- Added F19 — Short Straight Duct fitting (SDS Fitting Library)
What’s new
- Added an alternative layout for Square-to-Round fitting (PractiCAM Single Wall Library)
What’s new
- Added Round Weather Cap fitting (PractiCAM Single Wall Library)
- Added Round Lateral Tee fitting (PractiCAM Single Wall Library)
- Added 6 new fittings in the PractiCAM Double Wall Library
- Removed notches from all round fittings in SPOT Single Wall Library
- Added Switch On/Off Marking Mode tool to the Part Editor
- Added Switch ON/Off Nesting Mode tool to the Part Editor
- Added Gap Quantity parameter for Round Elbow fittings
- Added Use Attachment parameter for Round Elbow fittings
- Enhanced PractiCAM Dampers
- Added notches for Square Elbows in Lockformer Fitting Library at the bend of the heel
What’s new
- Added an ability to manage dimensions on 3D label picture
- SDB files handling for ESAB Vision type controllers
- Round Offset Gored N x N (PractiCAM Single Wall Library)
- Round Elbow Gored 2 Outline (PractiCAM Single Wall Library)
- Round Elbow Gored 3 Outline (PractiCAM Single Wall Library)
- Enhanced download on Cybermation type controllers
What’s new
- Square Throat and Radius Heel Tee (PractiCAM Single Wall Library)
- Peak Flashing (PractiCAM Single Wall Library)
What’s new
- Round Tee with Round Tap (PractiCAM Single Wall Library)
- Round Tee with Round Tap (PractiCAM Double Wall Library)
- Added the possibility to set GIF file as Logo in the reports templates
What’s new
- Display of error checking conditions
What’s new
- Added new type of Accessories for Rectangular Straight Duct — "Damper"
- Damper Sleeve 1,2,3,4 (PractiCAM Single Wall Library).
What’s new
- Added new 4 x 6 Label template
- Added parameter "Sheared" for blanks
What’s new
- Enhanced bend information for the new label types
What’s new
- Round Mitered Elbow with Trimmed Lock (PractiCAM Single Wall Library)
- New label — plan labels showing actual face outlines with breaks
- Notches for the seams on Branches and Tees
- Alignment notches on all Round and Oval fittings
- Notches to mark axis of the Round fittings with taps
- Notches which are shows the straight part of the oval fitting body or oval tap
What’s new
Fittings
- Straight Duct with Branch (PractiCAM Single Wall Library)
- Straight Duct with 2 Branches (PractiCAM Single Wall Library)
- Three Way Square Tee (PractiCAM Single Wall Library)
- Square Tee with Angled Throats (PractiCAM Single Wall Library)
Reports
- Rods Report
- Weld Connectors Report
- Weld Connectors Report by Edge
- Enhanced Fitting View report
What’s new
Fittings
- Square Elbow with Angled Throat (PractiCAM Single Wall Library)
- Square Radial Tee with Reducing Out (PractiCAM Single Wall Library)
- Round Conical Tee with Conical Tap (PractiCAM Single Wall Library)
- Round Three Way Tee (PractiCAM Single Wall Library)
Reports
- Sheets for Cutter Report
- Blanks for Coil Report
Parts
- Oval Flange in Simple Part Library
- Enhanced PractiCAM Data Exchange File handling
What’s new
- Changed format of internal data structure
What’s new
- Enhanced Rod parameters
What’s new
- Round Reducer with Round Taps N X N (PractiCAM Single Wall Library)
- Enhanced Plan Labels for Fittings with Taps
- Enhanced Saving Fittings to Custom Library
What’s new
- N-Tapped Round Conical Cross (PractiCAM Single Wall Library)
- Chase Top with N Rectangular Taps (PractiCAM Single Wall Library)
- Acoustic Liner and Wrap to Spiral Pipes
- Enhanced import of Custom Fitting and Parts Libraries
- Added possibility to export Parts and Fittings from PractiCAM into AutoCAD files
What’s new
- Finished Length Transition (PractiCAM Single Wall Library)
- Chase Top (PractiCAM Single Wall Library)
- Three Way Splitter (PractiCAM Single Wall Library)
- 2 Way Wye (PractiCAM Single Wall Library)
- N Gored Round Elbow (PractiCAM Single Wall Library)
- N Gored Oval Elbow — Hard and Soft (PractiCAM Single Wall Library)
- Added possibility to apply Specifications on Spiral Pipe
What’s new
- Rectangular Canvas connection (PractiCAM Single Wall Library)
- Round Canvas connection (PractiCAM Single Wall Library)
- Oval Canvas connection (PractiCAM Single Wall Library)
- Torpedo Boot (PractiCAM Single Wall Library)
- Rectangular 3 Way Wye (PractiCAM Single Wall Library)
- Two Way Splitter (PractiCAM Single Wall Library)
What’s new
- Concentric Transition (PractiCAM Single Wall Library)
- Rain Flange (PractiCAM Single Wall Library)
- Boot Tap (PractiCAM Single Wall Library)
- Round Tapering (PractiCAM Single Wall Library)
- Y-Branch (PractiCAM Single Wall Library)
What’s new
- Spiral Pipe (Oval)
- Spiral Pipe (Round)
- Round End Cap with Round Hole (PractiCAM Single Wall Library)
- Rectangular End Cap with Round Hole (PractiCAM Single Wall Library)
- Filter Rack (PractiCAM Single Wall Library)
What’s new
- Added a new type of Internal Stiffeners into PractiCAM Accessories library — Tie Rods
- Added an ability to organize Fitting and Part Custom Libraries (Create/Delete/Rename folders and sub foldersrs)
- Added a new labels template — Label 4x3 Plan
What’s new
- Added a new type of sheet labels
- Enhanced an ability to add allowances in the Part Editor
What’s new
- Enhanced Export to Coil Line procedure
What’s new
- Added progress indicator to My Computer working space
- Added an ability to view .JPEG files
- Added report and label previews in the Printer settings
- Added bend information on labels
- Added Mark and Bend Notches
What’s new
- Added notches for Round Gored Elbows 7 and 9 (PractiCAM Single Wall Library)
- Implemented download of PMX files from remote server
What’s new
- Added notches for Round Gored Elbows 7 and 9 (PractiCAM Single Wall Library)
- Implemented download of PMX files from remote server
- Enhanced import from CAD
What’s new
- Square-to-Round Flat on Side (PractiCAM Single Wall Library)
- Enhanced segmentation of Radius Elbow (PractiCAM Single Wall Library)
- Enhanced 6 Fitting View Report (Plan View)
- Added an ability to save sorting labels by cut as a default setting
- Added Rod In for Goldberg fitting
- Added parameter Seam for the Radius Tee, Rectangular Wye and Radial Branch Tee (PractiCAM Single Wall Library)
- Enhanced Scrap cutting procedure
What’s new
- Square Tee 2 Locks (PractiCAM Single Wall Library)
- Radial Branch Tee 3 Locks (PractiCAM Single Wall Library)
- Added an ability to export and import Special Instructions and Current Dictionary
- Added an ability to select data for import from previous versions in the setup
What’s new
- Transition Radius Offset (United McGill Library)
- Added tracking for oval fittings
- Modified Labels for Double Transition Offset fitting
What’s new
- Added software kerf compensation
- Enhanced view of Materials working page
What’s new
- Added an ability to import MDI and LST files for United McGill
What’s new
- Pan (PractiCAM Single Wall Library)
- Simple Roof Curb (PractiCAM Single Wall Library)
What’s new
- Added non-cut path optimization as an option
- Enhanced Cost Reports
- Enhanced Blank Labels for wide fittings
- Enhanced dimensioning of Blank Labels for Pan and Simple Roof Curb fittings
What’s new
- Radius Elbow with Notched Lock (PractiCAM Single Wall Library)
- Added an ability to cut a single blank from the takeoff
- Enhanced Fitting View Report
What’s new
- Marking Notches for the Radial fittings
- Added assembly instructions on blank labels
What’s new
- Enhanced Double Transition Offset (PractiCAM Single Wall Library)
What’s new
- Enhanced Tracking feature round and oval fittings
What’s new
- French Language
What’s new
- Enhanced backup procedure
- Enhanced Register Box (PractiCAM Single Wall Library)
What’s new
- Test release for United McGill
What’s new
- Register Box (PractiCAM Single Wall Library)
- Enhanced cutting procedure for the Round Offset fitting
What’s new
- Added an ability to import/export special notches
- Enhanced Double Transition Offset (PractiCAM Single Wall Library)
- Enhanced Cost Report
What’s new
- Spanish Language
- Enhanced Radius Elbow (PractiCAM Single Wall Library)
What’s new
- Error checking for closeness and self-intersection in part geometry in Part Editor
- Added new Segmentation Scenario for Square Elbow (PractiCAM Single Wall Library)
- Added fields for default Shop & Field Labor Costs into My Work
- Enhanced ESAB — file transfer and ESAB — file transfer SDB cutter drivers
What’s new
- Round Tee with Conical Tap (Joint on Tap) (PractiCAM Single Wall Library)
- Added Description and S.P. fields into Specification and reports
- Enhanced Radius Elbow (PractiCAM Single Wall Library)
- Enhanced Radius Throat and Heel Non-90 Elbow (Lockformer Library)
What’s new
- Added preview for the blank modifications on 3D View of the fitting
What’s new
- Added Reports and Labels with Plan View of fittings
- Added new segmentation scenario for Rectangular End Cap
What’s new
- Added Feet and Pounds for square and volume measures
What’s new
- Russian Language
What’s new
- Added an ability to organize Jobs, Drawings and Takeoffs
- Added an ability create, delete and sort Jobs on the right button mouse click
- Added driver for ESAB cutter "ESAB — SDP";
- Added Adjustment Tables in the Duct Sizing
- Added preview for flange-like connectors
What’s new
- Oval undersizing table is extended with Tube Size, Spacer and Comments fields
What’s new
- Saddle with Rectangular Tap (PractiCAM Single Wall Library)
- Enhanced Square Throat and Radius Heel Non-90 Elbow fitting
- Added Material Consumption Report
What’s new
- Belt Guard (PractiCAM Single Wall Library)
- Enhanced Radius Tee, Radial Branch Tee and Rectangular Wye fittings
What’s new
- Double Radius Tap (PractiCAM Single Wall Library)
- Added 6 Fittings View reports
- Enhanced Fitting View report
- Enhanced Sheet Labels
- Enhanced Labels for fittings with 2 or more locks
What’s new
- Weight Report by Connector
What’s new
- Added Place for Tap parameter for Pan fitting
What’s new
- Added Mark Groups
- Added new fittings in the PractiCAM Double Wall Library
- Added an ability to show Angles or Drops for bend lines on Labels in degrees or in inches
What’s new
- Enhanced printer memory handling
What’s new
- Added an ability to define nesting gaps
- Enhanced material stock handling
- Enhanced user profile handling
- Improved software request delivery
- Added alternative segmentation scenario for Double Offset
What’s new
- Improved arc handling for various cutters
What’s new
- Added SPOT Fitting Library with special explode features
- Added Square Tap on Plate (PractiCAM Single Wall Library)
- Enhanced cutter setup procedure
- Added visualization for Cut From feature
- Enhanced scaling for raster-to-vector conversion tool
What’s new
- Goldberg (PractiCAM Single Wall Library)
- Double Offset (PractiCAM Single Wall Library)
What’s new
- Enhanced nesting for the Coil Line
- Expanded fitting features for Roof Jack and Round Tee with Boot Tap
- Added new reports
- Added Rotate parameter for Square to Oval (PractiCAM Single Wall Library)
- Added Round Conical Tee with Conical Loose Tap(PractiCAM Double Wall Library)
- Enhanced Radius Elbow (PractiCAM Single Wall Library)
- Enhanced Angle Throat/Radius Heel Drop Cheek Elbow (PractiCAM Single Wall Library)
- Enhanced Radius Tee (PractiCAM Single Wall Library)
- Enhanced Radial Branch Tee (PractiCAM Single Wall Library)
- Enhanced all Elbows from the Lockformer Library
What’s new
- Boot Tap on Round Body (PractiCAM Single Wall Library)
- Round Elbows with 7 and 9 Gores (PractiCAM Single Wall Library)
- Round Y with 3 Joints (PractiCAM Double Wall library)
- Added Spin parameter to Oval Tee with Rotatable Oval Tap (PractiCAM Single Wall Library)
- Enhanced Roof Jack on a Pitch (PractiCAM Single Wall Library)
- Enhanced handling of density in weight reports
- Enhanced dimensional relationships for Double Wall Duct
- Improved Round End Cap (PractiCAM Single Wall Library)
What’s new
- Improved Bolt Accessory
- Modified Elbow fittings (PractiCAM Single Wall Library)
- Added new drivers for Engel coil line
What’s new
- Test release (Unicode)
What’s new
- New feature: Fitting locator
- Added Bolts and TDC/TDF Corners to Connector Accessories
- Added new set of rports for the Connector Accessories
What’s new
- Enhanced printing procedure
What’s new
- New fitting library — PractiCAM Double Wall Library
- Improved dimensions for Round Reducer, Transition, Transition 2 Locks, and Oval Offset (PractiCAM Single Wall Library)
What’s new
- Improved undersizing/oversizing input procedure
- Added accessories to Gooseneck elbow
- Enhanced Angle Throat and Radius Heel Elbow (PractiCAM Library)
- Improved Z-stiffeners
What’s new
- Added number of bends for Square to Round and Square to Oval fittings (PractiCAM Library)
- Angle Throat/Radius Heel Elbow to Lockformer Library
- Improved lock positioning for Transitions in all libraries
- Added Offset and Top/Bottom change dimensions to rectangular fittings (PractiCAM Library)
What’s new
- Added an ability to specify parking points for cutter tables
- Improved PractiCAM labels
What’s new
- Angle Throat and Radius Heel Elbow (PractiCAM Library)
- Enhanced PractiCAM Specifications
What’s new
- Error checking for the fittings with Rotatable Tap
What’s new
- Enhanced handling of TDC, TDF, Ductmate and similar connectors
- Enhanced PractiCAM Specifications
- Corrected shapes of marking notches
- Improved software installation procedure
What’s new
- Added marking notches for Oval Straight Duct
- Added a parameter "Mark Notches per Circle" for Square-to-Round and Square-to-Oval fittings
- Enhanced PractiCAM Specifications
- Enhanced Raster-to-vector conversion tool algorithm
What’s new
- Added an ability to sort labels by cut order
- Added user-defined mark notches for Square-to-Round and Square-to-Oval fittings from PractiCAM Library
- Improved interactive nesting
- Enhanced lock handling for Transitions from PractiCAM Library
- Enhanced Raster-to-vector conversion tool interface
What’s new
- Rectangular Straight Duct (Double Wall) (PractiCAM Library)
- Enhanced Raster-to-vector conversion tool
- Enhanced progress vizualization
- Various interface enhancements
What’s new
- Improved functionality of Software Requests
What’s new
- Raster-to-vector conversion tool for color bitmaps
- Turning Vanes for oval fittings
- Improved waste reduction features
- Improved handling of radius vanes
What’s new
- Raster-to-vector conversion tool
- Added new accessories — Connector Accessories
What’s new
- Tangential Tee (PractiCAM Library)
- Added Flange parameter to all round and oval taps (PractiCAM Single Wall Library)
- Enhanced Wye 3 Joints (PractiCAM Library)
- Enhanced handling of multiple accessories
- Enhanced CrypKey security features
What’s new
- Round Tee with Reducing Tangential Tap (PractiCAM Library)
- Added new accessories — Round Vanes
- Added Round Vanes for Round Mitered Elbow (PractiCAM Library)
- Added Round Vanes report
- Added individual vane labels
- Added locator grid for the cutter setup view, and for labels
- Added an ability to select gore label for the printing
What’s new
- Round Wye 3 Joints (PractiCAM Library)
- Added Sheet Number to the blank label
What’s new
- Square Elbow 2 Locks (PractiCAM Library)
- Transition 2 locks (PractiCAM Library)
- Oval Tee with Rotatable Round Tap (PractiCAM Library)
- Added a new parameter "Tap Angle", for Round Tee with a Square Tap and the Round Tee with 2 Square Taps (PractiCAM Library)
- Added a parameter "Tap Seam Angle" for all fittings with round taps within PractiCAM library
What’s new
- Added the possibility to create a body and tap with the same diameter
- Added language selection
- Added Seam Angle parameter for Body and Tap for all round fittings in PractiCAM library
What’s new
- Added new reports
- Enhanced reports and printer setup
What’s new
- Enhanced custom data handling
What’s new
- Added support for multiple languages (Spanish, French, Russian, Korean)
What’s new
- Added ornamental parametric parts
- Added file saving feature for the cutters
- Added new fittings into United McGill libraries
What’s new
- Enhanced list of fitting parameters
- Added Rod Out for Square Goosneck (PractiCAM Library)
- Enhanced Angle Throat and Radius Heel Elbow (PractiCAM Library)
- Enhanced Round Reducer (PractiCAM Library)
What’s new
- United McGill Double Wall Round UNI-GASKET Library
What’s new
- United McGill Single Wall Round UNI-GASKET Library
What’s new
- United McGill Double Wall Library
What’s new
- United McGill Single Wall Library
What’s new
- Added new fittings to the United McGill Library
What’s new
- No Waste Rectangular Straight Duct (PractiCAM Library)
- Added fittings to the United McGill Library
What’s new
- Added Multiple Rods to all round fittings in Lockformer, Cybermation, CAD, CAM and GOWCO libraries
What’s new
- Added implementation for the CrypKey options
What’s new
- Added Multiple Rods to all Rectangular Fittings in PractiCAM, Lockformer, Cybermation, CAD and CAM libraries
What’s new
- Pan (PractiCAM Library)
- Cover (PractiCAM Library)
- Added Radius Vanes
- Added an ability to preview image files
- Added Nest Diagram reports
- Added an ability to set Multiple Rods
- Added Multiple Rods for Round Fittings from PractiCAM library
What’s new
- Added engine for checking errors in fitting editor
- Enhanced import from CAD
What’s new
- Added GOWCO Dual Wall Fitting library
- Added Damper Rods for the Round Fittings from GOWCO Dual Wall library
What’s new
- Added new estimation algorithm
What’s new
- Added SEMCO Dual Wall Fitting library
- Added GOWCO Single Wall Fiting library
- Added Damper Rods for the Round Fittings from SEMCO libraries
- Added Damper Rods for the Round Fittings from GOWCO Single Wall library
What’s new
- Added SEMCO Single Wall Fitting library
- Added Damper Rods for the Round Fittings from Lockformer library
What’s new
- Added Lockformer Fitting library
- Added Damper List Report
- Added Coupling List Report
- Added Flex List Report
What’s new
- Added Damper Rods for the Round Fittings from CAD , CAM & Cybermation libraries
What’s new
- Added a new type of Accessories — Damper Rods
- Added Damper Rods for the Round Fittings from PractiCAM library
What’s new
- Added Duct Length & Number of Stiffeners for Rectangular Duct into Specifications
What’s new
- Added Special Notches library
- Added Cybermation Fitting library
What’s new
- Turning Vanes
- Added Vane and Stiffener Labels
- Added import Stiffeners and Vanes from CAD
What’s new
- Accessories Library
- Added a new type of Accessories — Stiffeners
What’s new
- Added Sample Specification Tables
- Added Sample Material Stocks
What’s new
- Improved Labels Templates
What’s new
- Enhanced Automatic Segmentation interface
What’s new
- Added Automatic Segmentation Library
What’s new
- Added CAD Fitting library
What’s new
- Added expanded hints
What’s new
- Data import from previous installations
What’s new
- Enhanced fitting input
What’s new
- Added backup and restore data facility
What’s new
- Added CAM Fitting library
What’s new
- PractiCAM database optimization
- Implemented .NET enhaincments
What’s new
- Reduced loading time
- Added animation to setup images
- Implemented .NET enhaincments
What’s new
- Enhanced part editor
What’s new
- Added Interactive Segmentation
- Added standard windows Hints to Setup
What’s new
- Enhanced Installation and Setup
What’s new
- Enhanced My Equipment interface
- Enhanced selection methods in Bins customization
What’s new
- Enhanced Material and Allowance libraries
What’s new
- Enhanced font and bin management
What’s new
- Added splash screen
- Import from CAD
- Added bar-code support
- Improved consistency of system defaults
What’s new
- Enhanced authorization procedure
- Added metric system to all PractiCAM features
- Added special instructions
- Added Cost Estimating tables for round fittings
- Enhanced coil line download interface
- Enhanced Browser control and Bin management
What’s new
- Added import for Specifications & Allowances
- Added Help
- Added user access management
What’s new
- Added Lot Inventory
- Added Scrap Inventory
- Added Alpha Parts
- Added Custom Parts & Fittings
- Added Labor History
- Added Tool Bin in the Part Editor
- Added export to Coil Line
- Added automatic gauge/thickness conversion
- Added material cost data
- Added Cost Estimating with standard SMACNA tables
What’s new
- Added CrypKey security
- Improved database encryption